MEM-CO Barbed Fitting Elbow: 1/4 in Pipe x 1/16 in ID Size, MNPT x Barbed, Brass
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/4 in MNPT connection and a 1/16 in ID beaded barb. This MNPT x Barbed, Brass, Beaded Barb configuration (MPN 1/4LB1) provides a…
SKU 3G-OTH-476599
Need installation or engineering help?
Ask a question
Product Description
The MEM-CO Barbed Fitting Elbow is a standard brass barbed tube fitting with a 1/4 in MNPT connection and a 1/16 in ID beaded barb. This MNPT x Barbed, Brass, Beaded Barb configuration (MPN 1/4LB1) provides a reliable, leak-resistant joint for low-pressure fluid or air lines. 3G Electric interprets your demand, sources the correct MEM-CO fitting, and supports your application with specialist expertise across 14 industrial departments — including combustion, pumps, and controls.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the MEM-CO Barbed Fitting Elbow used for?
The MEM-CO Barbed Fitting Elbow connects 1/16 in ID tubing to a 1/4 in male NPT port in low-pressure fluid or air systems. It is commonly used in pneumatic controls, lubrication lines, and instrumentation circuits where a compact, leak-resistant joint is required.
What are the specifications of the MEM-CO 1/4LB1 barbed fitting?
The MEM-CO 1/4LB1 is a brass barbed fitting elbow with a 1/4 in MNPT thread and a 1/16 in ID beaded barb. It is a standard MNPT x Barbed, Brass, Beaded Barb configuration designed for reliable low-pressure connections in fluid and air lines.
Where to buy MEM-CO barbed fittings in worldwide?
3G Electric supplies MEM-CO barbed fittings worldwide. We interpret your application requirements, source the correct part like the 1/4LB1 elbow, and handle logistics, customs, and delivery to your site globally. Contact us for availability and lead time.
How to install a MEM-CO brass barbed elbow?
Apply thread sealant to the 1/4 in MNPT end and tighten into the female port. Push the 1/16 in ID tubing fully onto the beaded barb until seated. For low-pressure air or fluid lines, secure with a hose clamp if needed. Avoid over-tightening the brass threads.
MEM-CO Products
3G Electric supplies MEM-CO standard brass barbed tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
