LEGRIS Compression Fitting Elbow: 4 mm OD x 4 mm OD Fitting Size, Compression x Compression
The LEGRIS Compression Fitting Elbow is a standard sleeve brass compression fitting with a 4 mm OD x 4 mm OD fitting size, configured as Compression x Compression and supplied in a 10-pack (MPN 0102 04 00). This…
SKU 3G-OTH-482031
Need installation or engineering help?
Ask a question
Product Description
The LEGRIS Compression Fitting Elbow is a standard sleeve brass compression fitting with a 4 mm OD x 4 mm OD fitting size, configured as Compression x Compression and supplied in a 10-pack (MPN 0102 04 00). This product is part of our broad industrial solutions across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor for brands including LEGRIS, Schneider, ABB, Siemens, SKF, Festo, Fluke, Interpump and FBR.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a LEGRIS compression fitting elbow used for?
A LEGRIS compression fitting elbow connects two 4 mm OD tubes at a 90° angle in pneumatic or fluid systems. It provides a leak-tight seal using a brass compression sleeve, ideal for instrumentation, control panels, and industrial machinery across multiple departments.
What are the specifications of the LEGRIS 0102 04 00 fitting?
The LEGRIS 0102 04 00 is a standard sleeve brass compression fitting elbow. It has a 4 mm OD x 4 mm OD fitting size, Compression x Compression configuration, and is supplied in a 10-pack. The brand is LEGRIS, and the manufacturer part number is 0102 04 00.
Where to buy LEGRIS compression fittings worldwide?
3G Electric supplies LEGRIS compression fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the LEGRIS 0102 04 00 elbow or other pneumatic components from brands like LEGRIS, Festo, and SKF.
How to install a LEGRIS compression fitting elbow?
To install a LEGRIS compression fitting elbow, cut the tube squarely, insert it fully into the fitting, and tighten the nut by hand, then use a wrench for an additional 1/4 to 1/2 turn. Avoid overtightening to prevent damage to the brass sleeve. Always check for leaks after installation.
Used in
Common applications for LEGRISLEGRIS Products
3G Electric supplies LEGRIS standard sleeve brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
