JACO Female Elbow Compression Connector: 1/4 in OD x 1/4 in Pipe Size, Compression x FNPT
The JACO Female Elbow Compression Connector is a polypropylene compression tube fitting with a 1/4 in OD x 1/4 in Pipe Size, configured as Compression x FNPT in a 5-pack. It is NSF 14 Listed (MPN 45-4-4-P-PG). 3G…
SKU 3G-OTH-473869
Need installation or engineering help?
Ask a question
Product Description
The JACO Female Elbow Compression Connector is a polypropylene compression tube fitting with a 1/4 in OD x 1/4 in Pipe Size, configured as Compression x FNPT in a 5-pack. It is NSF 14 Listed (MPN 45-4-4-P-PG). 3G Electric interprets this demand and supplies it across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a JACO Female Elbow Compression Connector used for?
This JACO polypropylene compression fitting connects 1/4 in OD tubing to a 1/4 in FNPT female pipe thread at a 90° angle. It is used in potable water and low-pressure fluid systems where NSF 14 compliance is required, such as filtration or plumbing applications.
What are the specifications of the JACO 45-4-4-P-PG compression connector?
The JACO 45-4-4-P-PG is a polypropylene female elbow connector with a 1/4 in OD compression end and a 1/4 in FNPT pipe thread. It comes in a 5-pack and is NSF 14 Listed for potable water contact. The compression x FNPT configuration allows secure tubing-to-pipe connections.
Where to buy JACO compression fittings in worldwide?
3G Electric supplies JACO compression fittings like the 45-4-4-P-PG to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order this 5-pack of polypropylene female elbow connectors for your application.
How to install a JACO polypropylene compression fitting?
To install a JACO compression fitting, cut the tubing square, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then hand-tighten the nut. Use a wrench for an additional 1/4 to 1/2 turn. Avoid overtightening to prevent damage to the polypropylene components.
Used in
Common applications for JACOJACO Products
3G Electric supplies JACO polypropylene compression tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.









