IPS DS-PC-1IPS-PT/100 Snap-In Rigid IPS Pipe & Conduit Clamp
The IPS Clamp: Spring Steel is a snap-in rigid IPS pipe and conduit clamp designed for use with Dakota Smart-Strut. It features a gray spring steel construction with an SST finish (Dakota ProTect™ Wet/Dry: 1000hr)…
SKU 3G-OTH-06349
Also listed as: DSPC1IPSPT100 · DS PC 1IPS PT 100 · DS-PC-1IPS-PT-100
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The IPS Clamp: Spring Steel is a snap-in rigid IPS pipe and conduit clamp designed for use with Dakota Smart-Strut. It features a gray spring steel construction with an SST finish (Dakota ProTect™ Wet/Dry: 1000hr) and is identified by manufacturer part number DS-PC-1IPS-PT/100.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the IPS Clamp: Spring Steel used for?
The IPS Clamp: Spring Steel is a snap-in rigid IPS pipe and conduit clamp used to secure conduit to Dakota Smart-Strut. It is suitable for wet/dry environments thanks to its SST finish (Dakota ProTect™ 1000hr).
What are the specifications of the IPS Clamp: Spring Steel?
The IPS Clamp: Spring Steel has a gray spring steel construction with an SST finish (Dakota ProTect™ Wet/Dry: 1000hr). It is designed for 1 in conduit trade size and is compatible with Dakota Smart-Strut. The manufacturer part number is DS-PC-1IPS-PT/100.
Where to buy IPS Clamp: Spring Steel worldwide?
3G Electric supplies the IPS Clamp: Spring Steel worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the IPS Clamp: Spring Steel?
To install the IPS Clamp: Spring Steel, snap it onto the Dakota Smart-Strut channel at the desired location. Ensure the conduit is seated securely within the clamp. No special tools are required. Follow standard industry practices for conduit support spacing.
Used in
Common applications for IPSIPS Products
3G Electric supplies IPS snap-in rigid ips pipe & conduit clamps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- ELECTRIDUCT ELECTRIDUCT heat shrink end caps with a 3:1 shrink ratio, UV light resistance, and a temperature range of -55°C to 110°C. Inner diameter is 1 in before shrinking and 0.31 in after shrinking. Pack of 100. Used to seal and insulate cable ends, protecting against moisture, dust, and corrosion in electrical systems
- ELECTRIDUCT ELECTRIDUCT heat shrink end caps seal and protect cable ends, splices, and conduit terminations. With a 3:1 shrink ratio, they accommodate a 1-inch inner diameter before shrinking and reduce to 0.31-inch after. Rated for -55°C to 110°C and UV light resistant, these caps are suitable for outdoor and industrial applications where moisture and dirt ingress must be prevented
- ELECTRIDUCT These heat shrink end caps seal and insulate cable ends, providing environmental protection against moisture, dust, and abrasion. With a 3:1 shrink ratio, they fit over wires or conduits with an inner diameter up to 0.8 in and shrink to 0.29 in. Suitable for use in control panels, junction boxes, and general electrical installations within a temperature range of -55°C to 110°C. Supplied in a pack of 100
- ELECTRIDUCT These heat shrink end caps provide insulation and sealing for cable or conduit ends. With a 3:1 shrink ratio, the 4.72-inch inner diameter reduces to 2.36 inches after heating. The caps operate from -55°C to 110°C and are supplied in a pack of 25
- ELECTRIDUCT Heat shrink end caps for sealing and insulating cable ends, wire terminations, or conduit openings. Supplied in a pack of 25. Features a 3:1 shrink ratio, inner diameter of 2.17 inches before shrinking and 1 inch after shrinking. Operating temperature range from -55°C to 110°C
- ELECTRIDUCT Pack of 25 heat shrink end caps with a 3:1 shrink ratio. Before shrinking, the inner diameter is 1 in; after shrinking, it reduces to 0.31 in. Operating temperature range is -55°C to 110°C. Used to seal and insulate cable ends, conduit ends, or wire terminations in electrical installations
