Datasheet Content
[{"filename":"MG_en.pdf","text":"MG\n Pressure gauge for Gas\n\n\n\n\nelektrogas.com EE145 – 0118\n\f ELEKTROGAS – Datasheet EE145 – 0118\n\n\n\nMG\nPressure gauge for gas\n\n\nContents\n Description ............................................................................................................. 2\n Features................................................................................................................. 2\n Technical specifications ......................................................................................... 3\n Ordering information .............................................................................................. 5\n\n\n\nDescription\n Pressure gauge MG are robust instrument suitable for fast measurement on site. Different\n dimensions and materials allows to find the proper solution for every installation. A button valve\n type ME can be installed to prevent damages due to pressure surges.\n\n\n\nFeatures\n These pressure gauges are available with display dimension Ø63, Ø80 and Ø100. The\n connection is radial with male thread ¼” for Ø63, 3/8” for Ø80 and ½” for Ø100.\n\n Manometers are capsule types for pressure till 600 mbar, for higher pressure they have a\n Bourdon tube.\n\n They are designed in compliance with EN 837-1 and 3.\n\n The accuracy is ± 1,6% of full scale.\n\n They are suitable for ambient temperature -20/+60°C. If temperature of process medium is\n higher, proper devices shall be used to cool it before reaching the instrument (e.g. dissipators,\n capillaries).\n\n Continuous operating pressure can be max 75% of full scale.\n\n ME valve is a push-button valve which applies pressure to gauge only when it is pushed, in\n normal condition manometer is relieved of pressure. The installation of this valve extends life of\n pressure gauge and reduces possibilities of wrong reading (e.g. in case of dirty the pressure\n gauge can block in a position different from actual pressure).\n\n Suitable for air and non-aggressive gaseous fuels (families 1-2-3 EN437). Special versions are\n available for use with aggressive gases (e.g. biogas).\n\n This figure shows an example of typical installation in combination with other Elektrogas\n devices.\n\n\n 1 Ball valve VSG\n 2 Filter FG\n 3 Pressure regulator R\n 4 Tightness control LD\n 5 Min. Gas pressure switch PSG\n 6 Valve position visual indicator VI\n 7 Fast opening safety valve VMR\n 8 Slow opening safety valve VML\n 9 Tightness control pressure switch\n 10 Closed position indicator switch PCS\n 11 Pressure gauge MG\n 12 Button valve ME\n\n Fig. 1\n R\n e\n t\n WARNING e\n This device\n G\n shall be installed in accordance with the laws in force.\n a\n s\n 2-5\n\f ELEKTROGAS – Datasheet EE145 – 0118\n\n\n\n\nTechnical specifications Tab. 1\n\n\n\n MG pressure gauges\n\n Display dimension Ø63 Ø80 Ø100\n and connection (male thread) G1/4 G3/8 G1/2\n\n Accuracy ± 1,6%\n\n Ambient and media temperature -20°C / +60°C\n\n Housing Brass, steel and transparent glass\n\n Enclosure protection IP32 (EN60529)\n\n 0 - 25 mbar\n 0 - 40 mbar 0 - 1 bar\n 0 - 60 mbar 0 - 1.6 bar\n 0 - 100 mbar 0 - 2.5 bar\n Pressure ranges\n 0 - 160 mbar 0 - 4 bar\n 0 - 250 mbar 0 - 6 bar\n 0 - 400 mbar 0 - 10 bar\n 0 - 600 mbar\n\n Continuous operating pressure\n 75% of full scale\n (15 minutes and more)\n\n\n Version and Standard version for air and Stainless steel version\n media type gaseous fuels in accordance for chemically aggressive\n with EN437 (fam. 1-2-3) gaseous fuels (e.g. Biogas)\n Materials in contact\n with media\n Brass AISI 304\n Bronze AISI 316\n\n Tab. 2\n\n ME button valve\n\n Connection (female thread) G1/4 G3/8 G1/2\n\n Ambient and media temperature -20°C / +60°C\n\n Maximum operating pressure 6 bar\n\n Brass and NBR rubber\n Materials in contact\n Suitable only for air and gaseous fuels in accordance with\n with media\n EN437 (fam. 1-2-3)\n\n\n\n\n 3-5\n\f ELEKTROGAS – Datasheet EE145 – 0118\n\n\n\n\n Fig. 2\n\n Tab. 3\n\n\n Dimension of standard version (mm)\n\n C Weight\n G\n Dysplay End Kg\nType A B D E F\n Size spanner\n wrench\n\nMG7 63 17 17 17 64 39 14 G1/4 0.20\n\nMG8 80 25 15 20 81 58 20 G3/8 0.35\n\nMG9 100 27 15 24 101 60 22 G1/2 0.45\n\n\n\n\n INTERNAL\n THREAD\n\n\n\n\n BUTTON Ø10\n\n\n END SPANNER WRENCH\n 22 (1/4”-3/8”) OR 27 (1/2”)\n\n INTERNAL\n THREAD\n\n Fig. 3\n\n\n\n\n 4-5\n\f ELEKTROGAS – Datasheet EE145 – 0118\n\n\n Ordering information\n\n MG pressure gauge and ME valve has to be ordered separately.\n The operative pressure of the instrument shall be between 25% and 75% of full scale. The full\n scale shall be approximately the double of the operative pressure.\n Tab. 4\n\n MG 9 E\n Product type\n MG pressure gauge\n\n\n Display dimension\n 7 Ø63 1/4”\n 8 Ø80 3/8”\n 9 Ø100 1/2”\n\n\n Pressure range\n A 0-25 mbar I 0-1 bar\n B 0-40 mbar L 0-1,6 bar\n C 0-60 mbar M 0-2,5 bar\n D 0-100 mbar N 0-4 bar\n E 0-160 mbar P 0-6 bar\n F 0-250 mbar Q 0-10 bar (not with ME valve)\n G 0-400 mbar\n H 0-600 mbar\n\n\n Version\n _ Standard\n J Stainless steel version\n Tab.…
