ELECTRIDUCT Heat Shrink End Caps, 3:1 Ratio, UV Resistant, 10 Pack
The ELECTRIDUCT Heat Shrink End Caps (SKU HSEC-200-UV-BK-10PK, MPN HSEC-200-UV-BK-10PK) are UV-light-resistant end caps with a 3:1 shrink ratio, a 2.17 in I.D. before shrinking, and a 1 in I.D. after shrinking. They…
SKU 3G-OTH-53543
Also listed as: HSEC200UVBK10PK · HSEC 200 UV BK 10PK
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The ELECTRIDUCT Heat Shrink End Caps (SKU HSEC-200-UV-BK-10PK, MPN HSEC-200-UV-BK-10PK) are UV-light-resistant end caps with a 3:1 shrink ratio, a 2.17 in I.D. before shrinking, and a 1 in I.D. after shrinking. They operate within a temperature range of -55°C to 110°C and come in a 10-pack.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What are ELECTRIDUCT Heat Shrink End Caps used for?
ELECTRIDUCT Heat Shrink End Caps seal and protect cable ends, wire bundles, or conduit terminations from moisture, dust, and UV exposure. They are commonly used in outdoor electrical installations, solar systems, and industrial wiring where UV resistance and a reliable environmental seal are required.
What are the specifications of ELECTRIDUCT Heat Shrink End Caps?
These end caps have a 3:1 shrink ratio, a 2.17 in inner diameter before shrinking, and a 1 in inner diameter after shrinking. They are UV light resistant and operate from -55°C to 110°C. The 10-pack (MPN HSEC-200-UV-BK-10PK) is manufactured by ELECTRIDUCT.
Where to buy ELECTRIDUCT Heat Shrink End Caps worldwide?
3G Electric supplies ELECTRIDUCT Heat Shrink End Caps worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this 10-pack (SKU 3G-OTH-53543) for your project.
How to install ELECTRIDUCT Heat Shrink End Caps?
Slide the end cap over the cable or conduit end before shrinking. Apply heat evenly using a heat gun at approximately 250°C to 350°C until the cap shrinks tightly around the substrate. Allow to cool completely. Ensure the surface is clean and dry for optimal adhesion and sealing.
Used in
Common applications for ELECTRIDUCTELECTRIDUCT Products
3G Electric supplies ELECTRIDUCT heat shrink end caps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
