DYKEM Torque Marking Paste: 60 sec Dry Time, Orange, BMS8-45H
The DYKEM Torque Marking Paste (MPN 83514) is an orange torque marking paste with a 60-second dry time. It meets BMS8-45H, Type I/III specifications and is compliant with Embraer PN/Specification MEP 09-096 Rev. G…
SKU 3G-OTH-285262
Need installation or engineering help?
Ask a question
Product Description
The DYKEM Torque Marking Paste (MPN 83514) is an orange torque marking paste with a 60-second dry time. It meets BMS8-45H, Type I/III specifications and is compliant with Embraer PN/Specification MEP 09-096 Rev. G. This product is approved as an organic F-925 torque seal replacement part.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is DYKEM Torque Marking Paste used for?
DYKEM Torque Marking Paste is used to visually indicate that a fastener has been torqued to specification. It is applied to bolts and nuts in aerospace and industrial applications, providing a tamper-evident seal. This orange paste meets BMS8-45H, Type I/III and Embraer MEP 09-096 Rev. G specifications.
What are the specifications of DYKEM Torque Marking Paste MPN 83514?
The DYKEM Torque Marking Paste MPN 83514 has a 60-second dry time and is orange. It meets BMS8-45H, Type I/III and Embraer PN/Specification MEP 09-096 Rev. G. It is approved as an organic F-925 torque seal replacement part. The manufacturer part number is 83514.
Where to buy DYKEM Torque Marking Paste worldwide?
You can source DYKEM Torque Marking Paste worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time. We supply this DYKEM product to aerospace and industrial customers globally.
How to apply DYKEM Torque Marking Paste?
Apply DYKEM Torque Marking Paste to a clean, dry fastener after torquing. Use a brush or applicator to place a small stripe across the nut and bolt interface. Allow 60 seconds for the paste to dry. The dried mark will indicate if the fastener has loosened. Store in a cool, dry place.
Used in
Common applications for DYKEMDYKEM Products
3G Electric supplies DYKEM torque marking pastes. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
