DUNGS VI - Visual Indicator (US/CA)
The VI mounts to the bottom of the valve and visually displays when the valve is open or closed.
SKU 3G-OTH-02872
Also listed as: VIUSCA · VI US CA
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The VI mounts to the bottom of the valve and visually displays when the valve is open or closed.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the DUNGS VI Visual Indicator used for?
The DUNGS VI Visual Indicator mounts to the bottom of DUNGS SV, MV, DMV-D, and DMV-ZRD series shutoff valves to visually display whether the valve is open or closed. It is used in gas train applications for natural gas, propane, butane, hydrogen, and noncorrosive gases.
What are the specifications of the DUNGS VI Visual Indicator?
The DUNGS VI Visual Indicator has a pressure rating of 10 PSI and is available in brass (order no. 266949) or stainless steel (order no. 273546). It is approved for use with DUNGS shutoff valves and complies with standards including NFPA 86, CSD-1, ANSI Z21.13, UL 795, and CSA B149.3.
Where to buy the DUNGS VI Visual Indicator in Singapore?
You can source the DUNGS VI Visual Indicator through 3G Electric in Singapore. We handle logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this DUNGS accessory.
How to install the DUNGS VI Visual Indicator?
To install the DUNGS VI Visual Indicator, first remove the plug and o-ring from the bottom of the valve using a 5 mm hex key wrench. Then insert the indicator with its o-ring and tighten clockwise using a 5/8" (16 mm) open end wrench. Always perform a leak and function test after installation.
Used in
Common applications for DungsDungs Products
3G Electric supplies Dungs accessory. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- TESA BROWN This continuous reading back lug dial indicator has a 0 to 1 inch measurement range with 0.002 inch accuracy. It features a lug back and back plunger design for mounting on fixtures or machine tables. Typical applications include measuring runout, taper, and part dimensions in machining and inspection setups
- LEICA DD Mini sonde transmitter operating at 33 kHz, designed for use with a boring tool to locate buried pipes, conduits, and cables. Compatible with LEICA DD300 locator. Color: Black/Silver
- DDS Single-lip oil seal with rubber-enclosed case designed for rough bores. Features a nitrile lip with spring, SC design, and inch-system dimensions. Used to retain lubricants and exclude contaminants in rotating shaft applications such as pumps, gearboxes, and motors
- DDS This single-lip oil seal features a rubber-enclosed case designed for rough bores. The SC-design seal has a nitrile lip with a spring, measuring 96 mm inner diameter, 112 mm outer diameter, and 10 mm width. It is used to seal rotating shafts in equipment such as gearboxes, pumps, and motors, preventing lubricant leakage and contaminant ingress
- LEICA DD The LEICA DD Utility Line Signal Transmitter (DA175) applies a 640 Hz signal to buried pipes or cables for tracing with a compatible receiver. It offers a maximum locating depth of 10 ft, IP67 dust and water ingress protection, and supports both direct connection and induction coupling. This transmitter is used in construction and excavation to locate underground utilities
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bore applications. It is a TC-type seal with a fluoro rubber lip and spring, providing effective sealing in rotating shafts. With a 310 mm inner diameter, 350 mm outer diameter, and 18 mm width, it is commonly used in industrial gearboxes, pumps, and heavy machinery to prevent lubricant leakage and contaminant ingress