DUNGS HPSV - High Pressure Safety Shutoff Valves (US/CA)

[{"filename":"hpsv_datasheet_us_264710.pdf","text":"High Pressure\n Safety Shutoff Valve\n 2\" ANSI Flange\n\n HPSV 10020 Series\n\n\n\n\n Normally closed automatic safety\n shutoff valve with the following\n approvals.\n\n CSA Certified\n • ANSI Z21.21 • CSA 6.5\n • Marked C/I\n • File No. 1010989\n • Up to 100 PSI\n\n • Hazardous Location Standards\n • ANSI/ISA-12.12.01-2013 and C22.2\n No. 213-M1987(R 2013)\n • File No. 70011088\n\n Codes and Standards\n This product is intended for instal-\n lations covered by but not limited to\n NFPA 37, UL 2200, CSA B149.1, CSA\n B149.3 or CSA B149.6.\n\n DUNGS is an ISO 9001\n manufacturing facility.\n\n\n Technical Description Application\n The HPSV high pressure safety shutoff The HPSV is recommended for in-\n valve is a single-stage automatic shut- dustrial and commercial applications\n off valve for gas engines or other high that require an automatic shutoff valve\n pressure applications using 24 VDC. incorporating proof of closure.\n\n - Double-seated valve The HPSV is suitable for dry natural gas,\n\n\n\n\n HPSV 10020 Series Sales Brochure • P/N 264710 • Ed. 05/25\n - Max. operating pressure up to 100 PSI propane, butane, 100 % hydrogen, air\n (7 bar) and inert gases for pressures up to 100\n - HPSV: fast-open/fast-close PSI. Suitable for up to 0.1% by volume,\n - ANSI B16.5, Class 150, 2\" flat face dry H2S.\n flange\n - High flow rates A “dry” gas has a dew point lower than\n - Proof of closure with visual indication +15 °F and its relative humidity is less\n than 60 %.\n\n\n\n\n1…8\n\fHPSV 10020/604 VIP Normally closed automatic shutoff valve. Fast opening, fast closing.\n\nHPSV 10020/614 HL Normally closed automatic shutoff valve with proof of closure and visual indication.\n Fast opening, fast closing.\n\nSpecifications\nFlange Type ANSI B16.5, Class 150 flat face\nSize 2\"\nMax. operating pressure 100 PSI (7 bar) acc. ANSI Z21.21/CSA 6.5 C/I\nMax. body pressure 500 PSI (33 bar)\nMax. close off pressure 100 PSI (7 bar)\nElectrical ratings (-10 % to +15 %) 24 VDC\nPower ratings 45 W\nEnclosure ratings NEMA Type 4 and Suitable for hazardous locations Class I, Division 2, Groups\n B, C and D, Temperature code T4A.\nElectrical connection Quick disconnect according to MIL ACS02A-10SL-04P-003\n According to CSA C22.1 Part 1.\n For HPSV without Proof of Closure, the leads are non-polarity sensitive.\n For HPSV with Proof of Closure, the leads are polarity sensitive.\nOperating time 100 % duty cycle\nClosing time <1s\nOpening time (to max. flow) <1s\nMaterials in contact with gas Housing: Aluminium, Steel; free of non-ferrous metals, Stainless Steel\n Sealings on valve seats: NBR-based rubber\nAmbient / Fluid Service Temperature CSA\n -20 °F to +140 °F (-29 °C to +60 °C)\n Factory\n +5 °F to +140 °F (-15 °C to +60 °C)\nStorage Temperature -40 °F to +113 °F (-40 °C to +45 °C)\nInstallation position Safety shutoff valve from vertically upright to horizontal\nVibration Resistance According to MIL 810 Vibration Profile\nGas strainer (standard) Installed in the housing upstream 1 mm stainless steel mesh strainer\nProof of closure switch SPDT switch\nFactory mounted and calibrated • 250 mA @ 24 VDC and 110/120 VAC\n • Requires min. load 20 mA for LEDs\n\n\n\n\n 2…8\n\f Dimensions HPSV without Proof of Closure\n\n\n\n\n e\n\n a\n Upstream Downstream c\n 1/4“ NPT Tap 1/4“ NPT Tap\n\n\n\n\n f g\n\n\n\n\n b d\n\n\n\n\n d = Space required for replacing solenoid\n\n Type Order No. Dimensions [inch] Weight\n Dimensions [mm] [lbs]\n [kg]\n a b c d e f g h\n HPSV 10020/604 VIP 270890 2.95 8.82 6.30 6.02 9.84 2.09 2.52 5.59 13.2\n 75 224 160 153 250 53 64 142 6,0\n\n\n\n\n3…8\n\fDimensions HPSV wit Proof of Closure\n\n\n\n Space requirement\n for mounting\n solenoid\n\n\n\n\n e\n Upstream Downstream c a\n 1/4“ NPT Tap 1/4“ NPT Tap\n\n\n\n\n f\n g\n\n\n\n h\n\n i\n\n\n\n\n Space requirement\n for mounting\n POC Plug\n b d\n\n\n\n\nType Order No. Dimensions [inch] Weight\n Dimensions [mm] [lbs]\n [kg]\n a b c d e f g h i\nHPSV 10020/614 HL 295848 2.95 8.82 6.30 6.02 9.84 2.09 2.52 6.18 8.39 13.2\n 75 224 160 153 250 53 64 157 213 6,0\n\n\n\n\n 4…8\n\f Flow Curve metric\n\n\n\n\n HP\n SV\n 10\n 02\n HP 0/6\n SV 14\n HL\n 10 &P\n 02\n 0/6 I\n 04\n VIP\n\n\n\n\n Pressure drop for other gases the “corrected” flow rate in CMH through f (f = 0.66 for propane). Use this “cor-\n To determine the pressure drop when the valve for the other gas used. For ex- rected” flow rate and the flow curve on\n using a gas other than natural gas, ample, when using propane, divide the the next page to determine pressure\n use the flow formula below and f value volume (CMH) of propane…