DEFELSKO PosiTest AT 50 mm Aluminum Dollies, 4 PK
The DEFELSKO Dolly (50mm) is a set of four 50 mm aluminum dollies supplied in a plastic tube, designed as replacement or additional dollies for the PosiTest AT adhesion tester. These dollies are compatible with the…
SKU 3G-OTH-175294
Also listed as: ADDITIONAL50MMDOLLIES · ADDITIONAL-50MM-DOLLIES
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The DEFELSKO Dolly (50mm) is a set of four 50 mm aluminum dollies supplied in a plastic tube, designed as replacement or additional dollies for the PosiTest AT adhesion tester. These dollies are compatible with the PosiTest AT model and are sold under the DEFELSKO brand.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the DEFELSKO Dolly (50mm) used for?
The DEFELSKO Dolly (50mm) is used as a replacement or additional dolly for the PosiTest AT adhesion tester. It is designed for pull-off adhesion testing on coatings, allowing operators to measure the bond strength between a coating and its substrate in industrial quality control applications.
What are the specifications of the DEFELSKO Dolly (50mm)?
The DEFELSKO Dolly (50mm) includes four 50 mm aluminum dollies supplied in a plastic tube. It is compatible with the PosiTest AT model and carries the manufacturer part number ADDITIONAL 50MM DOLLIES. The dollies are sold under the DEFELSKO brand and are designed for adhesion testing.
Where to buy DEFELSKO Dolly (50mm) in worldwide?
You can source the DEFELSKO Dolly (50mm) through 3G Electric, a global industrial equipment distributor established in 1990. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this DEFELSKO accessory.
How to install the DEFELSKO Dolly (50mm) on a PosiTest AT?
To install the DEFELSKO Dolly (50mm), clean the coating surface and the dolly base, then apply a suitable adhesive to bond the dolly to the coating. Allow proper cure time per adhesive instructions before attaching the PosiTest AT tester. Follow standard pull-off adhesion testing procedures for accurate results.
Used in
Common applications for DEFELSKODEFELSKO Products
3G Electric supplies DEFELSKO dollies. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- DDS This DDS dual-lip oil seal features a reinforced metal case for installation in smooth bores. The TA-design seal is constructed from nitrile rubber with a spring-loaded two-lip configuration. It is used to seal rotating shafts in equipment such as gearboxes, pumps, and motors, preventing lubricant leakage and contaminant ingress. Dimensions: 125 mm inner diameter, 155 mm outer diameter, 15 mm width
- DDS Metric dual-lip oil seal with reinforced metal case for smooth bores. TA seal design with spring-loaded 2-lip configuration. Nitrile elastomer. Inner diameter 135 mm, outer diameter 170 mm, width 15 mm. Used in rotating equipment such as pumps, gearboxes, and motors to prevent lubricant leakage and block contaminants
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bores, with a spring-loaded sealing lip. It is constructed from nitrile material and has a 104 mm inner diameter, 125 mm outer diameter, and 10 mm width. Suitable for sealing rotating shafts in industrial equipment such as gearboxes, pumps, and motors
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bore applications. It has a nitrile construction with a spring-loaded two-lip design to retain lubricants and exclude contaminants. Suitable for rotating shafts in industrial equipment such as pumps, gearboxes, and motors
- DDS This dual-lip oil seal features a reinforced metal case for installation in smooth bores. The nitrile construction and spring-loaded design provide sealing for rotating shafts in applications such as gearboxes, pumps, and motors. Rated for a maximum pressure of 7 psi, it measures 48 mm inner diameter, 65 mm outer diameter, and 10 mm width
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bores. It is made of nitrile with a TF-type configuration, including two lips and a spring. The seal has a 63 mm inner diameter, 85 mm outer diameter, and 10 mm width, with a maximum pressure rating of 7 psi. It is commonly used to seal rotating shafts in industrial gearboxes, pumps, and motors, preventing lubricant leakage and contaminant ingress
