DAYTON 4 Bolt Flange Bearing: Radial Ball, 1 7/16 in Bore, Cast Iron, Set Screws
The DAYTON 4 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 1 7/16 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, uses NLGI #2 equivalent…
SKU 3G-OTH-117734
Need installation or engineering help?
Ask a question
Product Description
The DAYTON 4 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 1 7/16 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, uses NLGI #2 equivalent lubricant, and requires a 1/2 in mounting bolt. This inch-system bearing has a non-split housing and is identified by manufacturer part number 3FCX9.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the DAYTON 4 Bolt Flange Bearing used for?
The DAYTON 4 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing used to support rotating shafts in industrial equipment such as conveyors, fans, and material handling systems. Its cast iron housing and set screw mounting provide reliable shaft retention in moderate-load applications.
What are the specifications of the DAYTON 4 Bolt Flange Bearing?
The DAYTON 4 Bolt Flange Bearing has a 1 7/16 in cylindrical bore, a cast iron housing with set screws, and a 4 5/8 in length. It uses NLGI #2 equivalent lubricant, requires a 1/2 in mounting bolt, and is an inch-system, non-split housing design. The manufacturer part number is 3FCX9.
Where to buy the DAYTON 4 Bolt Flange Bearing worldwide?
3G Electric supplies the DAYTON 4 Bolt Flange Bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us to source this bearing and arrange international shipping.
How to install the DAYTON 4 Bolt Flange Bearing?
To install the DAYTON 4 Bolt Flange Bearing, first clean the shaft and apply a light oil. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the 1/2 in bolts evenly. Then secure the shaft by tightening the set screws against the shaft using a hex key.
Used in
Common applications for DaytonDayton Products
3G Electric supplies Dayton general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
