DAYTON 4 Bolt Flange Bearing: Radial Ball, 7/8 in Bore, Cast Iron, Set Screws
The DAYTON 4 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 7/8 in cylindrical bore and a cast iron, not-split square housing. It uses set screws for shaft locking and is lubricated…
SKU 3G-OTH-116326
Need installation or engineering help?
Ask a question
Product Description
The DAYTON 4 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing with a 7/8 in cylindrical bore and a cast iron, not-split square housing. It uses set screws for shaft locking and is lubricated with Chevron SRI 2 grease. The bearing has a 3 3/4 in length and requires 3/8 in mounting bolts, with all measurements in inches.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the DAYTON 4 Bolt Flange Bearing used for?
The DAYTON 4 Bolt Flange Bearing is a general purpose flange-mount radial ball bearing used in industrial power transmission systems. It supports rotating shafts in conveyors, fans, and material handling equipment where a compact, rigid mounting is required. The cast iron housing and set screw locking suit moderate loads and speeds.
What are the specifications of the DAYTON 4 Bolt Flange Bearing?
The DAYTON 4 Bolt Flange Bearing has a 7/8 in cylindrical bore, cast iron square housing, and set screw shaft locking. It is not split, uses Chevron SRI 2 grease, and requires 3/8 in mounting bolts. Overall length is 3 3/4 in. All measurements are in inches. The manufacturer part number is 3FCX3.
Where to buy the DAYTON 4 Bolt Flange Bearing worldwide?
3G Electric supplies the DAYTON 4 Bolt Flange Bearing (3FCX3) worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time. We source and deliver this bearing to any country.
How to install the DAYTON 4 Bolt Flange Bearing?
To install the DAYTON 4 Bolt Flange Bearing, first ensure the shaft is clean and free of burrs. Slide the bearing onto the shaft, align the four mounting holes with the support structure, and tighten 3/8 in bolts evenly. Then tighten the set screws against the shaft using a hex key. Lubrication is pre-applied with Chevron SRI 2 grease.
Used in
Common applications for DaytonDayton Products
3G Electric supplies Dayton general purpose flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
