BUNTING BEARINGS Plastic Thrust Washer for Non-Hardened Surfaces
The BUNTING BEARINGS Thrust Washer is a plastic thrust washer for non-hardened surfaces with a 1/4 in bore, 5/8 in OD, and 0.062 in thickness. It is made from PTFE material grade JLON 5500, is orange in color, and…
SKU 3G-OTH-97520
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The BUNTING BEARINGS Thrust Washer is a plastic thrust washer for non-hardened surfaces with a 1/4 in bore, 5/8 in OD, and 0.062 in thickness. It is made from PTFE material grade JLON 5500, is orange in color, and comes in a pack of 5. This inch-system component is ISO 9001 certified (MPN BJ5T041002).
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a BUNTING BEARINGS thrust washer used for?
This plastic thrust washer is designed for non-hardened surfaces to reduce friction and wear in axial-load applications. It is commonly used in industrial machinery, gearboxes, and pumps where a low-friction PTFE material like JLON 5500 is needed to handle moderate loads without galling.
What are the specifications of the BUNTING BEARINGS thrust washer BJ5T041002?
The BUNTING BEARINGS thrust washer has a 1/4 in bore, 5/8 in OD, and 0.062 in thickness. It is made from PTFE material grade JLON 5500, orange in color, and comes in a pack of 5. This inch-system component is ISO 9001 certified with MPN BJ5T041002.
Where to buy BUNTING BEARINGS thrust washers worldwide?
3G Electric supplies BUNTING BEARINGS thrust washers worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this JLON 5500 PTFE washer to your facility. Contact us for availability and lead time on the BJ5T041002.
How to install a BUNTING BEARINGS plastic thrust washer?
Ensure the mating surfaces are clean and non-hardened. Place the washer over the shaft with the bore centered, then secure the assembly per standard axial-load practices. Avoid overtightening to prevent deformation of the PTFE material. Refer to BUNTING BEARINGS guidelines for torque values.
Used in
Common applications for BUNTING BEARINGSBUNTING BEARINGS Products
3G Electric supplies BUNTING BEARINGS plastic thrust washers for non-hardened surfaces. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.