BRIDGEPORT FITTINGS SB-388NM Split Insulating Bushing
The BRIDGEPORT FITTINGS Split Bushing (MPN SB-388NM) is a 3-inch trade size split insulating bushing. It features an overall length of 11/16 inches and is insulated.
SKU 3G-OTH-05276
Also listed as: SB388NM · SB 388NM
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The BRIDGEPORT FITTINGS Split Bushing (MPN SB-388NM) is a 3-inch trade size split insulating bushing. It features an overall length of 11/16 inches and is insulated.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is a BRIDGEPORT FITTINGS split insulating bushing used for?
A BRIDGEPORT FITTINGS split insulating bushing is used to protect electrical cables from abrasion and damage where they pass through knockout holes in metal enclosures, junction boxes, or panels. The insulated design provides electrical isolation and prevents short circuits. It is commonly installed in industrial, commercial, and residential wiring applications.
What are the specifications of the BRIDGEPORT FITTINGS SB-388NM split bushing?
The BRIDGEPORT FITTINGS SB-388NM is a 3-inch trade size split insulating bushing with an overall length of 11/16 inches. It is insulated and manufactured by BRIDGEPORT FITTINGS. The split design allows installation over existing cables without disconnecting them. The part number is SB-388NM.
Where to buy BRIDGEPORT FITTINGS split bushings worldwide?
BRIDGEPORT FITTINGS split bushings are available to order through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact 3G Electric for pricing and lead time on this SB-388NM bushing.
How to install a BRIDGEPORT FITTINGS split insulating bushing?
To install a BRIDGEPORT FITTINGS split insulating bushing, first ensure the knockout hole is clean and free of burrs. Open the split bushing and place it around the cable, then snap it into the knockout hole. The bushing should seat firmly, providing a smooth, insulated edge. No special tools are required for installation.
Used in
Common applications for BRIDGEPORT FITTINGSBRIDGEPORT FITTINGS Products
3G Electric supplies BRIDGEPORT FITTINGS split insulating bushings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- KIPP This steel insert features a flat face and counterbored bore for use in jigs and fixtures. The smooth bore and flat face provide a hardened, replaceable bearing surface for locating pins or fasteners. Height 10 mm, bore diameter 3.4 mm
- KIPP Steel insert with a flat face and counterbored hole, designed for use in jigs and fixtures as a replaceable bearing surface for locating pins or workpieces. The smooth bore and flat face provide precise alignment and reduce wear in tooling applications. Dimensions: 10 mm diameter, 3.4 mm bore diameter, 12 mm height
- KIPP This counterbored steel insert features a serrated face for positive grip in workholding applications. The 4.5 mm bore diameter accepts a flathead screw for flush mounting. Used in jig and fixture construction to provide a hardened, replaceable locating or clamping surface
- KIPP This steel insert features a flat face and a counterbore to accommodate a screw head, providing a flush-mounted, replaceable bearing surface. It is used in jigs and fixtures for clamping or locating workpieces. The smooth bore enables precise alignment in tooling applications
- KIPP Steel insert with serrated face for use in jigs and fixtures as a hardened, replaceable locating or clamping surface. The serrations prevent workpiece slippage, and the counterbore accepts a flat-head screw for flush mounting. Height 12 mm, bore diameter 4.5 mm
- KIPP This counterbored steel insert with a flat face is used in jig and fixture construction to provide a hardened bearing surface for clamping bolts or locating pins. The flat face and counterbore allow flush mounting for precise alignment. Specifications: 10 mm diameter, 3.4 mm bore diameter, 12 mm height, smooth finish
