OEM Compression Packing Ring: Graphite/PTFE, 2 in ID, 3 in OD, 0-14 pH, 507°F
The APPROVED VENDOR Compression Packing Ring (SKU ZUSA-CP-1275, MPN ZUSA-CP-1275) is a graphite/PTFE packing ring with a 3-inch outer diameter and 2-inch inner diameter. It is rated for a maximum steam temperature of…
SKU 3G-OTH-93912
Also listed as: ZUSACP1275 · ZUSA CP 1275
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Compression Packing Ring (SKU ZUSA-CP-1275, MPN ZUSA-CP-1275) is a graphite/PTFE packing ring with a 3-inch outer diameter and 2-inch inner diameter. It is rated for a maximum steam temperature of 507°F and a pH range of 0 to 14.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the APPROVED VENDOR Compression Packing Ring used for?
This graphite/PTFE packing ring seals rotating or reciprocating shafts in pumps, valves, and mixers. It withstands steam up to 507°F and pH 0–14, making it suitable for chemical processing, water treatment, and industrial fluid handling where chemical resistance and thermal stability are required.
What are the specifications of the APPROVED VENDOR Compression Packing Ring ZUSA-CP-1275?
The ring has a 3-inch outer diameter and 2-inch inner diameter. It is made of graphite/PTFE, rated for a maximum steam temperature of 507°F, and operates across a pH range of 0 to 14. The manufacturer part number is ZUSA-CP-1275.
Where to buy the APPROVED VENDOR Compression Packing Ring worldwide?
3G Electric supplies the APPROVED VENDOR Compression Packing Ring ZUSA-CP-1275 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this graphite/PTFE packing ring.
How to install the APPROVED VENDOR Compression Packing Ring?
Cut the ring to length, wrap it around the shaft, and stagger the joints 90 degrees per layer. Tighten the gland evenly to avoid binding. For best results, follow the pump or valve manufacturer's torque specifications and allow a short break-in period at low pressure.
OEM Products
3G Electric supplies OEM packing rings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.