OEM Heat Shrink Tubing: 0.75 in I.D
The APPROVED VENDOR Standard Heat Shrink Tubing (SKU 3G-OTH-54508, MPN ST750GR-48-1pk) is a green, 2:1 ratio tubing with a 0.75 in inner diameter before shrinking and a 0.38 in inner diameter after shrinking.
SKU 3G-OTH-54508
Also listed as: ST750GR481pk · ST750GR 48 1pk
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Standard Heat Shrink Tubing (SKU 3G-OTH-54508, MPN ST750GR-48-1pk) is a green, 2:1 ratio tubing with a 0.75 in inner diameter before shrinking and a 0.38 in inner diameter after shrinking.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is APPROVED VENDOR Heat Shrink Tubing used for?
APPROVED VENDOR Heat Shrink Tubing is used to insulate and protect electrical wires, cables, and connections from moisture, abrasion, and short circuits. It is commonly applied in industrial maintenance, automotive wiring, and panel building where a 2:1 shrink ratio provides a tight, secure fit over terminals and splices.
What are the specifications of APPROVED VENDOR Heat Shrink Tubing?
The APPROVED VENDOR Heat Shrink Tubing (MPN ST750GR-48-1pk) has a 0.75 in inner diameter before shrinking and a 0.38 in inner diameter after shrinking, with a 2:1 shrink ratio. It is green in color and supplied as a standard polyolefin tubing suitable for general-purpose electrical insulation.
Where to buy APPROVED VENDOR Heat Shrink Tubing in worldwide?
You can source APPROVED VENDOR Heat Shrink Tubing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this SKU 412KY3.
How to install APPROVED VENDOR Heat Shrink Tubing?
To install, slide the tubing over the wire or connector before shrinking. Apply heat evenly using a heat gun or hot-air tool at approximately 120–150 °C until the tubing conforms snugly. Allow it to cool completely. Ensure the tubing is fully seated before heating for a reliable insulation seal.
OEM Products
3G Electric supplies OEM standard heat shrink tubing. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
