OEM Approved Vendor Low-Lead Standard Sleeve Brass Compression Fitting
The APPROVED VENDOR Compression Fitting Union (MPN 700062-03) is a low-lead standard sleeve brass compression fitting for 3/16 in OD x 3/16 in OD tubing. 3G Electric interprets this demand and sources it across 14…
SKU 3G-OTH-471004
Also listed as: 70006203 · 700062 03
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Compression Fitting Union (MPN 700062-03) is a low-lead standard sleeve brass compression fitting for 3/16 in OD x 3/16 in OD tubing. 3G Electric interprets this demand and sources it across 14 industrial departments, with specialist depth in combustion, pumps and controls as a trust anchor.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the APPROVED VENDOR Compression Fitting Union used for?
This brass compression fitting union connects two 3/16 in OD tubes in low-pressure fluid or gas lines. It is commonly used in instrumentation, pneumatic controls, and hydraulic systems where a leak-tight, low-lead joint is required.
What are the specifications of the APPROVED VENDOR 700062-03?
The APPROVED VENDOR 700062-03 is a low-lead standard sleeve brass compression fitting union. It has a fitting size of 3/16 in OD x 3/16 in OD and is made of brass. The manufacturer part number is 700062-03.
Where to buy the APPROVED VENDOR 700062-03 worldwide?
3G Electric supplies the APPROVED VENDOR 700062-03 compression fitting union worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us to order this brass fitting for your instrumentation or pneumatic application.
How to install a brass compression fitting union?
Slide the nut and sleeve onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand. Use a wrench to tighten an additional 1/4 to 1/2 turn. Do not overtighten, as this can damage the sleeve or tube.
OEM Products
3G Electric supplies OEM low-lead standard sleeve brass compression fitting. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.