ANVIL Metal Pipe Elbow: 1 1/4 in x 1 in, Threaded x Threaded, Class 125, 175 psi @ 150° F
The ANVIL Metal Pipe Elbow (1 1/4 in x 1 in) is a low-pressure threaded pipe fitting, Class 125, with a 90° elbow configuration. It features threaded x threaded connections and a maximum operating pressure of 175 psi…
SKU 3G-OTH-653993
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The ANVIL Metal Pipe Elbow (1 1/4 in x 1 in) is a low-pressure threaded pipe fitting, Class 125, with a 90° elbow configuration. It features threaded x threaded connections and a maximum operating pressure of 175 psi @ 150° F (MPN 0300012804).
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the ANVIL 1 1/4 in x 1 in metal pipe elbow used for?
This ANVIL 90° elbow connects two threaded pipes of different diameters (1 1/4 in to 1 in) in low-pressure plumbing, HVAC, or industrial piping systems. It is rated Class 125 and handles up to 175 psi at 150 °F, making it suitable for water, air, or steam lines.
What are the specifications of the ANVIL metal pipe elbow 0300012804?
The ANVIL metal pipe elbow (MPN 0300012804) is a 90° elbow with threaded x threaded connections, reducing from 1 1/4 in to 1 in. It is Class 125 rated with a maximum operating pressure of 175 psi at 150 °F. This low-pressure threaded pipe fitting is made in the USA.
Where to buy ANVIL pipe fittings in worldwide?
3G Electric supplies ANVIL pipe fittings like this 1 1/4 in x 1 in elbow to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Class 125 threaded fitting.
How to install an ANVIL threaded pipe elbow?
Apply pipe thread sealant or PTFE tape to the male threads of both pipes. Hand-tighten the ANVIL elbow onto the larger 1 1/4 in pipe first, then connect the 1 in pipe. Use wrenches on the fitting's hex flats to snug the connections—avoid overtightening to prevent cracking the Class 125 fitting.
ANVIL Products
3G Electric supplies ANVIL low-pressure threaded pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
