ANVIL Cap: 3/8 in, NPT Threaded, 2,000 psi @ 150° F, Malleable Iron
The ANVIL Cap is a 3/8 in NPT threaded high-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 2,000 psi at 150° F. This cap provides a reliable closure for threaded pipe systems…
SKU 3G-OTH-466543
Need installation or engineering help?
Ask a question
Product Description
The ANVIL Cap is a 3/8 in NPT threaded high-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 2,000 psi at 150° F. This cap provides a reliable closure for threaded pipe systems, sourced and supported by 3G Electric across 14 industrial departments, with specialist depth in combustion, pumps, and controls.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the ANVIL 3/8 in NPT threaded cap used for?
The ANVIL cap is a threaded pipe fitting used to seal the end of a 3/8 in NPT pipe system in high-pressure industrial applications. It provides a reliable closure for steam, air, water, or gas lines where a maximum operating pressure of 2,000 psi at 150° F is required.
What are the specifications of the ANVIL cap 0318901287?
The ANVIL cap has a 3/8 in NPT thread, is made of malleable iron, and is rated for a maximum operating pressure of 2,000 psi at 150° F. The manufacturer part number is 0318901287. 3G Electric supplies this fitting across 14 industrial departments, with specialist depth in combustion, pumps, and controls.
Where to buy the ANVIL 3/8 in NPT cap worldwide?
3G Electric supplies the ANVIL 3/8 in NPT threaded cap to customers worldwide. We handle full logistics, customs clearance, and delivery for global orders. Contact us to source this malleable iron cap rated for 2,000 psi at 150° F, part number 0318901287.
How to install an ANVIL malleable iron pipe cap?
Apply pipe thread sealant or PTFE tape to the male NPT threads. Hand-tighten the ANVIL cap onto the pipe end, then use a wrench for an additional 1–2 turns to achieve a leak-free seal. Do not overtighten, as malleable iron can crack. Rated for 2,000 psi at 150° F.
ANVIL Products
3G Electric supplies ANVIL threaded high-pressure pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
