ANVIL Cap: 1 in, Threaded, 300 psi @ 150° F, Cap
The ANVIL Cap is a 1-inch threaded medium-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 300 psi at 150° F. This cap is designed to seal the end of a threaded pipe system…
SKU 3G-OTH-654413
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The ANVIL Cap is a 1-inch threaded medium-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 300 psi at 150° F. This cap is designed to seal the end of a threaded pipe system, providing a reliable closure for industrial piping applications.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the ANVIL 1-inch threaded cap used for?
The ANVIL 1-inch threaded cap seals the end of a threaded pipe system in industrial piping applications. It provides a reliable closure for medium-pressure lines, commonly used in water, steam, gas, and other process systems where a durable, leak-proof termination is required.
What are the specifications of the ANVIL cap 0318900602?
The ANVIL cap (MPN 0318900602) is a 1-inch threaded fitting made of malleable iron. It has a maximum operating pressure of 300 psi at 150° F. This medium-pressure pipe fitting is designed for threaded connections and provides a secure end closure in industrial piping systems.
Where to buy ANVIL pipe caps worldwide?
3G Electric supplies ANVIL pipe caps worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to source this 1-inch threaded malleable iron cap for your piping needs.
How to install an ANVIL threaded pipe cap?
To install an ANVIL threaded cap, clean the pipe threads and apply a suitable thread sealant or PTFE tape. Hand-tighten the cap onto the pipe end, then use a wrench for a final snug turn—avoid over-tightening to prevent damage. Always follow standard piping practices for pressure-rated fittings.
ANVIL Products
3G Electric supplies ANVIL medium-pressure threaded pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
