ANVIL 1/2 in Malleable Iron Threaded Pipe Cap, 300 psi @ 150°F
The Anvil Medium-Pressure Threaded Pipe Fitting is a 1/2-inch cap made of malleable iron, rated for a maximum operating pressure of 300 psi at 150° F. This threaded cap (MPN 0318900123) is designed for use in…
SKU 3G-OTH-654696
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The Anvil Medium-Pressure Threaded Pipe Fitting is a 1/2-inch cap made of malleable iron, rated for a maximum operating pressure of 300 psi at 150° F. This threaded cap (MPN 0318900123) is designed for use in medium-pressure piping systems.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the Anvil 1/2 in threaded cap used for?
This Anvil malleable iron cap (MPN 0318900123) seals the end of a 1/2-inch threaded pipe in medium-pressure systems. It is rated for 300 psi at 150 °F and is commonly used in industrial plumbing, steam, and compressed-air lines where a durable, leak-proof termination is required.
What are the specifications of the Anvil 1/2 in cap?
The Anvil cap (MPN 0318900123) is a 1/2-inch threaded fitting made of malleable iron. Its maximum operating pressure is 300 psi at 150 °F. It is designed for medium-pressure piping systems and is manufactured to industry-standard thread dimensions for reliable sealing.
Where to buy the Anvil 1/2 in threaded cap worldwide?
3G Electric supplies the Anvil 1/2-inch threaded cap (MPN 0318900123) to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this medium-pressure pipe fitting.
How to install the Anvil 1/2 in malleable iron cap?
Apply pipe thread sealant or PTFE tape to the male pipe threads, then hand-tighten the Anvil cap onto the pipe. Use a wrench to snug the cap firmly—avoid overtightening, which can stress the malleable iron. For 300 psi systems, verify thread compatibility and pressure rating before installation.
ANVIL Products
3G Electric supplies ANVIL medium-pressure threaded pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
