ANVIL 90° Malleable Iron Threaded Pipe Elbow, 3/4 in x 1/2 in, 300 psi @ 150°F
The ANVIL Metal Pipe Elbow is a 90° elbow, medium-pressure threaded pipe fitting made of malleable iron. It has a maximum operating pressure of 300 psi @ 150° F and measures 3/4 in x 1/2 in. This fitting is…
SKU 3G-OTH-461987
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The ANVIL Metal Pipe Elbow is a 90° elbow, medium-pressure threaded pipe fitting made of malleable iron. It has a maximum operating pressure of 300 psi @ 150° F and measures 3/4 in x 1/2 in. This fitting is manufactured in the USA (MPN 0310007802).
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the ANVIL 90° metal pipe elbow used for?
The ANVIL 90° metal pipe elbow is used to change the direction of piping in medium-pressure systems. It is suitable for steam, water, gas, and air lines in industrial plants, commercial buildings, and mechanical rooms where a durable, threaded malleable iron fitting is required.
What are the specifications of the ANVIL 3/4 in x 1/2 in pipe elbow?
This ANVIL pipe elbow is a 90° fitting with a maximum operating pressure of 300 psi at 150 °F. It has a 3/4 in female inlet and a 1/2 in female outlet, is made of malleable iron, and is manufactured in the USA (MPN 0310007802).
Where to buy ANVIL pipe fittings worldwide?
3G Electric supplies ANVIL pipe fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ANVIL 90° malleable iron elbow (MPN 0310007802) for reliable medium-pressure piping.
How to install an ANVIL threaded pipe elbow?
Apply pipe thread sealant or PTFE tape to the male threads before assembly. Hand-tighten the ANVIL elbow, then use a wrench for an additional 1-2 turns. Do not overtighten, as malleable iron can crack. Ensure the fitting is aligned to avoid stress on the piping system.
ANVIL Products
3G Electric supplies ANVIL medium-pressure threaded pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
