ANVIL Metal Pipe Elbow: 3/4 in x 1/2 in, Threaded x Threaded, Class 125, 175 psi @ 150° F
The ANVIL Metal Pipe Elbow (SKU 3G-OTH-653818) is a 90° low-pressure threaded pipe fitting with a 3/4 in x 1/2 in size. It features Threaded x Threaded connections, Class 125 rating, and a maximum operating pressure…
SKU 3G-OTH-653818
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The ANVIL Metal Pipe Elbow (SKU 3G-OTH-653818) is a 90° low-pressure threaded pipe fitting with a 3/4 in x 1/2 in size. It features Threaded x Threaded connections, Class 125 rating, and a maximum operating pressure of 175 psi @ 150° F (MPN 0300012200).
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the ANVIL 3/4 in x 1/2 in metal pipe elbow used for?
This 90° elbow connects two pipes of different diameters in low-pressure plumbing, HVAC, or industrial piping systems. It is rated Class 125 with a maximum operating pressure of 175 psi @ 150° F, suitable for water, air, or non-corrosive fluid lines.
What are the specifications of the ANVIL metal pipe elbow 0300012200?
The ANVIL metal pipe elbow (MPN 0300012200) is a 90° fitting with 3/4 in x 1/2 in Threaded x Threaded connections. It carries a Class 125 rating and a maximum operating pressure of 175 psi @ 150° F. It is made in the USA.
Where to buy the ANVIL 3/4 x 1/2 pipe elbow worldwide?
3G Electric supplies the ANVIL metal pipe elbow (SKU 3G-OTH-653818) to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this low-pressure threaded fitting.
How to install a threaded pipe elbow like the ANVIL 90° fitting?
Apply pipe thread sealant or PTFE tape to the male threads. Hand-tighten the elbow onto both pipes, then use a wrench for an additional 1-2 turns. Do not overtighten, as this can crack the fitting. Ensure the joint is aligned before final tightening.
ANVIL Products
3G Electric supplies ANVIL low-pressure threaded pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
