We ship to the Philippines — door-to-door, customs and logistics handled by 3G Electric

3G Electric
RFQ CartGet a QuoteSign inSign up
Image not available
AMPHENOLN-Type Coaxial Connectors

AMPHENOL N-Type Coaxial Connector

The AMPHENOL RF Connector is a male N-Type coaxial connector, specifically a right-angle connector with a silver-plated finish. This QPL-approved component, model M39012/05-0503, features a crimp-on termination and…

SKU 3G-OTH-384145

Also listed as: M39012050503 · M39012 05 0503 · M39012-05-0503

Brand
AMPHENOL
Item
N-Type Coaxial Connector
Part Number
M39012/05-0503
Category
N-Type Coaxial Connectors
Available to Order
Also known as:M39012/05-0503AMPHENOL
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
Worldwide Shipping
Air & sea freight
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support — the Philippines

Delivery
5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
Payment
Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
Ships to
Manila, Quezon City, Cebu, Davao, Batangas

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

AMPHENOL
Manufacturer Part Number
M39012/05-0503
Type
Right Angle Connector, Silver, Crimp-On, QPL Approved/Right Angle
Material
Brass
Color
Silver
Finish
Silver-Plated
Gender
Male
Features
-65 to 165°C Operating Temperature Range; 500 Minimum Mating Cycles; Gold-Plated Brass Contacts; PTFE Insulator; Red Silicone Gasket; Right Angle Orientation; Threaded Coupling; Uses Crimp Tool CTL-11
Standards
QPL Approved; RoHS (EU) Compliant
Catalog Page
N/A
Product Type
Right Angle Connector
Connector Type
N-Type
Country of Origin
Mexico (subject to change)
Maximum Frequency
11 GHz
Maximum Impedance
50 ohm
Connector Features
QPL Approved
Installation Method
Crimp-On
Product Description
N-type coaxial connectors transmit lower-frequency signals often used in microwave systems, spectrum analyzers, and antennas. These weatherproof connectors are suitable for use in harsh environments.
Compatible Coaxial Cable Type
Belden 83242 RG-142 RG-223 RG-400 RG-55 Times SF-142B

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.
Talk to an engineer

Ask a question

AMPHENOL Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The AMPHENOL RF Connector is a male N-Type coaxial connector, specifically a right-angle connector with a silver-plated finish. This QPL-approved component, model M39012/05-0503, features a crimp-on termination and is finished in silver.

Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.

Frequently Asked Questions

What is the AMPHENOL M39012/05-0503 RF connector used for?

The AMPHENOL M39012/05-0503 is a male N-Type coaxial right-angle connector used in RF and microwave applications. Its silver-plated finish and QPL approval make it suitable for military, aerospace, and telecommunications systems requiring reliable signal integrity and durability.

What are the specifications of the AMPHENOL M39012/05-0503?

The AMPHENOL M39012/05-0503 is a male, right-angle N-Type coaxial connector with a silver-plated finish. It features crimp-on termination and is QPL approved. The connector is silver in color and designed for high-frequency performance in demanding environments.

Where to buy the AMPHENOL M39012/05-0503 worldwide?

3G Electric supplies the AMPHENOL M39012/05-0503 worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us for pricing and lead time on this QPL-approved RF connector.

How to install the AMPHENOL M39012/05-0503 connector?

Install the AMPHENOL M39012/05-0503 by crimping the connector onto the coaxial cable using the appropriate crimp tool and die set. Ensure the cable is prepared to the manufacturer's strip dimensions. Follow standard RF connector installation practices for optimal signal performance.

Used in

Common applications for AMPHENOL
Telecommunications base stations — Amphenol N-Type male connectors (MPN 082-804) for antenna feeder cables
Test and measurement equipment — Amphenol SMA male solder cup connectors (MPN 901-9723) for 18 GHz signal paths
Broadcast transmission systems — Amphenol N-Type female to male adapters (MPN 082-213) for cable transitions
Industrial RF sensor networks — Amphenol SMA male crimp-on connectors (MPN 132231) for 12.4 GHz links
Aerospace avionics — Amphenol SMA female bulkhead connectors (MPN 132105) for panel feedthroughs
Data center cabling — Amphenol N-Type male 3-piece crimp connectors (MPN 172100) for 11 GHz backbone runs
Not sure this is the right part? Photo-identify it→

AMPHENOL Products

3G Electric supplies AMPHENOL n-type coaxial connectors. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

Compatible alternatives & equivalents

Cross-referenced by specification & description
AMPHENOL
AMPHENOL
Male N-Type right angle coaxial connector with silver-plated finish. Uses crimp-on (3 piece) attachment method. Supports frequencies up to 11 GHz. Meets MIL-STD-348. Suitable for RF and microwave systems requiring a 90-degree connection
AMPHENOL RF
AMPHENOL RF
Male TNC coaxial connector with right-angle body for 90-degree cable routing. Crimp-on (3 piece) termination. Supports frequencies up to 11 GHz. Suitable for RF signal transmission in telecommunications, broadcast, and industrial wireless systems
AMPHENOL
AMPHENOL
Male right-angle MCX/MMCX coaxial connector with gold-plated finish. Crimp-on termination for cable attachment. Supports frequencies up to 6 GHz. Used in RF interconnects for wireless systems, test equipment, and telecommunications where space-constrained right-angle connections are required
AMPHENOL
AMPHENOL
Male MCX right angle coaxial connector with gold-plated finish. Three-piece crimp-on design for secure cable termination. Used in telecommunications, wireless infrastructure, and test equipment where space constraints require a 90-degree connection
AMPHENOL
AMPHENOL
Male SMA right-angle coaxial connector with gold-plated finish. Supports frequencies up to 12.4 GHz. Crimp-on termination for cable attachment. Suitable for RF and microwave connections in telecommunications, test equipment, and antenna systems where space constraints require a right-angle interface
AMPHENOL
AMPHENOL
Male SMA right angle coaxial connector with gold-plated finish. Crimp-on (3 piece) design for secure cable attachment. Used in RF applications where a compact, right-angle interface is required, such as telecommunications and test equipment

More from AMPHENOL

View all AMPHENOL parts →
AMPHENOL
AMPHENOL
Female N-Type coaxial connector with White Bronze finish. Supports frequencies up to 11 GHz and 50 ohm impedance. Used for terminating coaxial cables in RF systems, antennas, and test equipment
AMPHENOL
AMPHENOL
Male N-Type coaxial connector with silver-plated finish. Crimp-on (3 piece) termination. Supports frequencies up to 11 GHz. Used in RF systems, antennas, and telecommunications equipment for reliable signal transmission
AMPHENOL
AMPHENOL
This AMPHENOL N-Type male coaxial connector features a crimp-on (3 piece) design with a White Bronze finish. It supports frequencies up to 11 GHz and has a 50 ohm impedance. Suitable for use in RF systems requiring reliable signal transmission
AMPHENOL
AMPHENOL
Male N-Type coaxial connector with crimp-on termination. White Bronze finish. Supports frequencies up to 11 GHz with 50 ohm impedance. Used in RF systems for antenna, test equipment, and wireless infrastructure connections
AMPHENOL
AMPHENOL
Male N-Type coaxial connector with clamp-on termination. Nickel-plated finish. Supports frequencies up to 11 GHz with 50 ohm impedance. Used in RF systems for antenna feeds, test equipment, and wireless infrastructure
AMPHENOL
AMPHENOL
Male N-Type coaxial connector with crimp-on (3 piece) design. White Bronze finish. Supports frequencies up to 11 GHz with 50 ohm impedance. Used in RF systems for antenna, test equipment, and wireless infrastructure connections
AMPHENOL
AMPHENOL
Male N-Type coaxial connector with silver-plated finish. Features clamp-on attachment and supports 50 ohm impedance with a maximum frequency of 11 GHz. Suitable for RF and coaxial cable assemblies in telecommunications, broadcast, and test equipment applications
AMPHENOL
AMPHENOL
Male N-Type coaxial connector with White Bronze finish. Crimp-on (3 piece) design rated for 11 GHz maximum frequency and 50 ohm impedance. Used for terminating coaxial cables in RF applications such as antennas, base stations, and test equipment

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first