Allanson ALF16-120V-WW Ret-gl Kitchen LED Hood Lamp

[{"filename":"ALF16-120V-WW-RET-GL-Installation-Guide_Double-Sided_05.05.25.pdf","text":"Specifications Guide Commercial Kitchen\n LED Hood Lamp\nALF16-120V-WW RET-GL\n Retrofit\n Description Lamp Type /Catalog #\n Retrofit Fixture ALF16-120V-WW RET-GL\n\n Retrofit for Models L55 Series under COMPONENT HARDWARE GROUP INC/E80045,\n and 1801 under KASON IND/E57013.\n\n\nSpecifications\nTypical Application: Commercial Cooking Hoods\nInput Voltage: 120VAC, 60HZ\nInput Current: 140mA\nPower Consumption: 17W\nColor Temperature: Warm White 3500°K\nMounting Distance: Min. 1.2M (4ft) above cooking surface\nTypical Brightness\n(lumens/fixture): 1250 lumens\nLocation: Suitable for Dry & Wet locations IP67\nOperating Temperature: -40°C to +75°C\nFixture Base: Die cast aluminum\nLamp Body: Stainless steel\nGasket: Silicone\nOverall Size: 5.93” Dia. x 2.95” H\nWarranty: 1 year\nCertifications: UL Listed, CSA Approved, NSF and CE\n\n PATENTED\nNo need for external power supply. Click here to\n see patent list\n120VAC direct input.\n\n\n\n\n 83 Commerce Valley Dr. E., Markham, ON L3T 7T3 05.05.25\n\n www.allanson.com | cservice@allanson.com | T: 1.800.661.7251 | F: 416.752.6717\n\f Installation Guide Commercial Kitchen\n LED Hood Lamp\n ALF16-120V-WW RET-GL\n Retrofit for Models L55 Series under COMPONENT HARDWARE GROUP INC/E80045,\n and 1801 under KASON IND/E57013.\n\n TO REDUCE THE RISK OF FIRE AND REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE THE RETROFIT\n LED HOUSING AND LED DRIVER.\n\n WARNING – Risk of fire or electrical shock. LED Retrofit Kit installation requireS knowledge of luminaries\n electrical system. If not qualified, do not attempt installation. Contact a qualified electrician.\n\n Do not make or alter any open holes in an enclosure of the wiring or electrical components during kit instal-\n lation. Make sure the input rating of the retrofit kit does not exceed the input rating of the luminaries.\n\n DO NOT EXPOSE THIS RETROFIT TO RAIN\n\n WARNING- To prevent wiring damage or abrasion, do not\n expose wiring to edges of sheet metal or other sharp objects. Housing Base\n (Not included)\n “NOT FOR USE WITH DIMMERS”\n\n CAUTION – RISK OF ELECTRICAL SHOCK – USE IN DRY or DAMP LOCATIONS ONLY.\n Turn off all power at circuit breaker or remote switch before installing or servicing.\n Adaptor\n Mounting the LED Retrofit fixture to the Existing Housing\n Step 1: Disconnect power\n Step 2: Remove exiting glass housing and incandescent lamp from lamp base\n Step 3: Disconnect orange quick connect and secure adaptor to the lamp\n Orange quick\n holder. Reconnect the quick connector to complete the installation connect\n Step 4: Turn clock wise to secure New Led Lamp Housing (ALF… series) onto\n the existing lamp base\n\n\n\n\n4” Complete Installed\n Product\n\n\n\n\n 5.93”\n\n\n\n\n 83 Commerce Valley Dr. E., Markham, ON L3T 7T3 05.05.25\n\n www.allanson.com | cservice@allanson.com | T: 1.800.661.7251 | F: 416.752.6717"}]