ACCUFORM Danger: Arc Flash Hazard Appropriate PPE Required Sign
The ACCUFORM Arc Flash Label is a vinyl adhesive sign (3 1/2 in x 5 in nominal size, 0.006 in thick) that warns of arc flash hazards and references NFPA 70E for minimum PPE requirements. It features adhesive…
SKU 3G-OTH-702987
Also listed as: LELC 140 · LELC-140
Local availability & support — the Philippines
- Delivery
- 5–8 business days door-to-door; Bureau of Customs clearance typically 2–4 business days.
- Payment
- Invoicing in PHP or USD. Bank transfer and corporate PO accepted.
- Ships to
- Manila, Quezon City, Cebu, Davao, Batangas
Need installation or engineering help?
Ask a question
Product Description
The ACCUFORM Arc Flash Label is a vinyl adhesive sign (3 1/2 in x 5 in nominal size, 0.006 in thick) that warns of arc flash hazards and references NFPA 70E for minimum PPE requirements. It features adhesive mounting, is not retroreflective, and does not glow in the dark.
Supplied to the Philippines — compatible with 60 Hz installations. DHL Express delivery to Manila, Quezon City, Cebu, customs and duties handled door-to-door.
Frequently Asked Questions
What is the ACCUFORM Arc Flash Label used for?
This vinyl adhesive label warns personnel of arc flash hazards and specifies required PPE per NFPA 70E. It is applied to electrical panels and equipment in industrial facilities to meet safety signage requirements and reduce injury risk during maintenance or operation.
What are the specifications of the ACCUFORM Arc Flash Label?
The ACCUFORM LELC140 label has a nominal size of 3 1/2 in x 5 in, is 0.006 in thick, and uses adhesive mounting. It is not retroreflective and does not glow in the dark. The sign displays a danger message referencing NFPA 70E for minimum PPE requirements.
Where to buy ACCUFORM Arc Flash Labels worldwide?
3G Electric supplies ACCUFORM arc flash labels to customers worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact our team for a quote on the LELC140 or other safety signage needs across 14 industrial departments.
How to install an adhesive arc flash label?
Clean the mounting surface thoroughly to remove dirt and grease. Peel the backing from the ACCUFORM vinyl label and press firmly onto the panel or enclosure. Ensure the label is placed in a visible location near the hazard. Avoid applying to uneven or wet surfaces for best adhesion.
Used in
Common applications for ACCUFORMACCUFORM Products
3G Electric supplies ACCUFORM danger: arc flash hazard appropriate ppe required do not operate controls or open covers without appropriate personal protection equipment. failure to comply may result in injury or death! refer to nfpa 70e for minimum requirements signs. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.