Power Transmission

Tech Support

Quote Response

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Page 9 of 278

BrandJW WINCO

BrandFAG BEARINGS

BrandMOLINE BEARING

BrandSEALMASTER

BrandMOLINE BEARING

BrandBUNTING BEARINGS

BrandMOLINE BEARING

BrandSILVERTHIN BEARING

BrandBUNTING BEARINGS

BrandBUNTING BEARINGS

BrandAPPROVED VENDOR

BrandIPTCI BEARINGS

BrandBUNTING BEARINGS

BrandSMITH BEARING

BrandBUNTING BEARINGS

BrandBUNTING BEARINGS

BrandBUNTING BEARINGS

BrandSTANDARD LOCKNUT

BrandMOLINE BEARING

Power Transmission

INA Combination Bearing: 25 mm Bore Dia, NKIB5905, Plastic, 42 mm Axial Bearing Outside Dia

NTN Tapered Roller Bearing Assembly: 28584/28521, 2 1/16 in Bore, 3 5/8 in OD

NTN 3 Bolt Flange Bearing: Radial Ball, 1 3/8 in Bore, SS, Set Screws, 3 17/32 in Lg

IGUS 4 Bolt Flange Bearing: 4 Bolt, 1/2 in Bore, 1 9/16 in Overall Lg

TRITAN Pillow Block Bearing: 30 mm Bore, Cast Iron, Eccentric Collar

JW WINCO Bearing Lock Washer: 70952-52-A-ST, Metric, Steel, 7.2 mm Washer Thick

FAG BEARINGS Cylindrical Roller Bearing: 216, 80 mm Bore, 140 mm OD, 26 mm Overall Wd

NTN Tapered Roller Bearing Cone: 560, 2 5/8 in Bore, 4.29 in OD, 1.444 in Cone Wd

NTN 3 Bolt Flange Bearing: Radial Ball, 20 mm Bore, SS, Set Screws, 63.5 mm Lg

MOLINE BEARING Flange Bearing: Spherical Roller, 1 3/4 in Bore, Cast Iron, Set Screws

NTN Tapered Roller Bearing Cup: 5 37/64 in Bore, 6 11/64 in OD, 1.031 in Cup Wd

SEALMASTER 4 Bolt Flange Bearing: Tapered Roller, 2 3/16 in Bore, Cast Iron

TIMKEN Pillow Block Bearing: 1 1/8 in Bore, Cast Iron, Set Screws

NTN 2 Bolt Flange Bearing: Radial Ball, 1 7/16 in Bore, Polymer, Set Screws

MOLINE BEARING Pillow Block Bearing: 3 7/16 in Bore, Fixed, Cast Iron, 3 3/8 in Shaft Ht

SKF Cylindrical Roller Bearing: 206, 30 mm Bore, 62 mm OD, 16 mm Overall Wd

BUNTING BEARINGS Sleeve Bearing: Bronze, 5/8 in Bore, 13/16 in OD, 1 3/4 in Lg

IGUS Sleeve Bearing: Polymer, 1/2 in Bore, 5/8 in OD, 1 in Overall Lg, Dark Red

OILITE Sleeve Bearing: Bronze, SAE 841, 1/2 in Bore, 5/8 in OD, 9/16 in Lg, -35°F to 300°F

NTN Tapered Roller Bearing Cone: 3579, 1 11/16 in Bore, 2.95 in OD, 1.216 in Cone Wd

GMN Super Precison Angular contact Bearing: KH 6001, Duplex, 17°, Dbl Sealed

MOLINE BEARING Flange Bearing: Spherical Roller, 3 in Bore, Cast Iron, Set Screws

NTN Pillow Block Bearing: 1 15/16 in Bore Dia, Stainless Steel

OILITE Sleeve Bearing: Bronze, SAE 841, 7/8 in Bore, 1 1/8 in OD, 2 in Lg

TRITAN Needle Roller Bearing: JH, 1010, 5/8 in Bore, 7/8 in OD, Open, 0.625 in Overall Wd

SILVERTHIN BEARING Ball Bearing: SD070ARO, Open, 7 in Bore Dia, 8 in Outside Dia

MRC Angular Contact Ball Bearing: 3212/5212, 2 Rows, 30°, Dbl Shield, ABEC 1

NTN Tapered Roller Bearing Assembly: 33207, 35 mm Bore, 72 mm OD, 28 mm Cone Wd

BUNTING BEARINGS Flanged Sleeve Bearing: Bronze, SAE 841, 3/4 in Bore, 1 in OD, 1 1/2 in Lg

INA Roller Thrust Bearing Washer: 2 1/2 in Bore Dia, 3 1/4 in Outside Dia

EZO Deep Groove Ball Bearing: 6805, Open, Contact Seal, 25 mm Bore, 37 mm OD

OILITE Thrust Washer: 1/8 in Bore, Nylon, 101, 5/8 in OD, 0.062 in Thick, -20°F to 210°F

BUNTING BEARINGS Sleeve Bearing: Bronze, SAE 841, 5/8 in Bore, 7/8 in OD, 5/8 in Lg, SAE 90 Oil with PTFE

NTN 2 Bolt Flange Bearing: Radial Ball, 1 15/16 in Bore, SS, Set Screws

SKF Cylindrical Roller Bearing: 318, 90 mm Bore, 190 mm OD, 43 mm Overall Wd

APPROVED VENDOR Thrust Washer: 20 mm Bore, 36 mm OD, 1.5 mm Thick

IPTCI BEARINGS Pillow Block Bearing: 3/4 in Bore, Polymer, Set Screws, 1 5/16 in Shaft Ht

TIMKEN Flange Mount Bearing: Radial Ball, 2 15/16 in Bore, Cast Iron, Set Screws

BUNTING BEARINGS Flanged Sleeve Bearing: Bronze, SAE 841, 3/8 in Bore, 1/2 in OD, 3/8 in Lg

OILITE Thrust Washer: 1/4 in Bore, Bronze, SAE 841, 1/2 in OD, 0.062 in Thick

SMITH BEARING Track Roller: 200 mm Roller Dia, Flat, Tapered Roller, 76 mm Roller Wd

BUNTING BEARINGS Sleeve Bearing: Bronze, SAE 841, 3/8 in Bore, 1/2 in OD, 3/4 in Lg, USDA H-1 Approved

BUNTING BEARINGS Flanged Sleeve Bearing: Nylon, 1/2 in Bore, 5/8 in OD, 3/4 in Overall Lg

BUNTING BEARINGS Sleeve Bearing: Bronze, SAE 841, 25 mm Bore, 32 mm OD, 20 mm Lg, SAE 30 Oil

STANDARD LOCKNUT Bearing Lock Washer: W13, Inch, Steel, 0.053 in Washer Thick, AN00/N00

TRITAN Needle Roller Bearing: JTT, 1614, 1 in Bore, 1 1/4 in OD, Dbl Sealed

TRITAN Radial Ball Bearing: 61805/6805, Double Shielded, 25 mm Bore Dia

MOLINE BEARING Flange Bearing: Spherical Roller, 3 in Bore, Cast Iron, Set Screws