LEICA LINO

Leica Lino cross-line laser levels, such as the Lino L2s, are specified with an accuracy of ±0.0079 inches at 33 feet (approximately ±0.2 mm/m). This rating applies to both horizontal and vertical lines under standard operating conditions. The accuracy is maintained by electronic self-leveling mechanisms that compensate for minor surface irregularities. For plane laser models like the L6Gs-1, horizontal accuracy is rated at ±0.3 mm/m. These specifications are typical for interior layout work and are verified at the factory. Users should verify the specific accuracy rating for each model, as it may vary between red and green beam versions or between cross-line and plane laser types.

Leica Lino laser levels are designed to operate on standard AA batteries, as seen in models like the Lino L2s and L6Gs-1. Some models may also accept rechargeable battery packs, though the specific compatibility depends on the model. For example, the L6Gs-1 includes a charger in its kit, indicating support for rechargeable cells. The RGR 200 receiver also uses AA batteries. Replacement batteries, such as the Leica Lino battery (MPN 842427), are available for models that use proprietary packs. Always consult the product manual for the exact battery type and quantity required, as using incorrect power sources may affect performance or void warranty.

The Leica Lino RGR 200 receiver is designed to detect red laser beams from compatible Leica Lino laser levels, extending their effective range and visibility in bright sunlight or over long distances. It has an overall height of 5.5 inches and uses AA batteries. The receiver provides audible and visual indication of beam position, allowing a single operator to align targets without direct line-of-sight to the laser. It is compatible with Leica Lino models that emit a red beam, such as the Lino L2s. The receiver is housed in a plastic enclosure and includes a mounting bracket for attachment to grade rods or other supports.

Leica Lino laser levels can be mounted using the TWIST 250 smart adapter (MPN TWIST 250), which is a black plastic adapter with a height of 2.5625 inches and width of 11.25 inches. This adapter allows attachment to standard tripods, wall mounts, or other fixtures with a 5/8-inch thread. Some models also include a built-in bracket or magnet for quick attachment to metal studs or beams. For permanent installations, the Leica Lino window frame (MPN 866152) can be used to mount the laser behind a wall opening, allowing the beam to pass through while protecting the unit. The adapter and frame are sold separately and are compatible with multiple Lino models, including the L2 and L2G.

Leica Lino laser levels are available in red beam (e.g., Lino L2s) and green beam (e.g., L6Gs-1) variants. Green beam lasers are generally more visible to the human eye, especially in bright conditions or over longer distances, but they consume more power and may have shorter battery life. Red beam lasers are more common and typically offer longer battery life and lower cost. Accuracy specifications are similar between the two types for comparable models. The choice depends on the working environment: green beams are preferred for outdoor or high-ambient-light applications, while red beams are sufficient for indoor use. Both types use Class 2 or Class 3R laser diodes, depending on the model, and require appropriate eye safety precautions.

Yes — 3G Electric (S) Pte. Ltd. supplies LEICA LINO products. We stock the LEICA LINO catalog and supply genuine factory-original products with full manufacturer warranty and technical support.